Additives
LIQUI MOLY 500mL Pro-Line Engine Flush
One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to th...
One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with most commercially available engine oils, and in oil running belt. Minimum oil filling of 3 liters(0.8 gal.) is requested for optimum product perfor...
LIQUI MOLY 500mL Truck Series Complete Diesel S...
To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The p...
To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance. Contents of Can sufficient for max.115 liters (30 gal.) of fuel.
LIQUI MOLY DIJectron Additive - Gasoline Direct...
The unique combination of proven PEA technology and the latest additive generation achieves maxim...
The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire fuel system. Furthermore, DIJectron stops the formation of new deposits so that complex injector systems always work at the highest efficiency. Regular use of DIJectron significantly reduces the risk of engine damage caused by Low Speed Pre Ignition (LSPI), optimizes exhaust gas emissions and protec...
LIQUI MOLY Pro-Line Turbocharger Additive
Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starva...
Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed protection and allow proper break-in of new units which prevents additional repairs.
LIQUI MOLY 300mL Radiator Cleaner
Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for...
Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to the manufacturers instructions. The content is sufficient for 10 liters (2.6 gal.)of water, a minimum of 4 liters (1 gal.) is required for optimum product performance.
LIQUI MOLY 500mL Pro-Line Fuel Injection Cleaner
To be added directly into the fuel tank. As a preventive measure, add during each inspection, aft...
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance. Contents of can sufficient for max. 70 liters (18 gal.) of fuel.
LIQUI MOLY 500mL Truck Series Oil Treatment
Ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistan...
Ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise. Specially designed for older engine designs with or without a turbocharger. Regular use keeps the engine in perfect working order.
LIQUI MOLY 500mL Truck Series Diesel Performanc...
An effective mixture of additives that clean and maintain diesel fuel systems. Prevents corrosion...
An effective mixture of additives that clean and maintain diesel fuel systems. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working order.